AlmaLinux 9.3 and SATA controller
Hi, I need to buy a SATA3 PCI-E 3.0 2x controller with 4 or 6 port. It will be installed on my workstation. I need to use AlmaLinux or at least Fedora.
Actually I found this:
https://www.silverstonetek.com/it/product/info/expansion-cards/ECS06/
but I can't determine if it is supported by the kernel. The chipset is ASMedia ASM1166 (AHCI). I can't find good results on google search.
How I can check if the controller is supported?
If not what controller do you suggest?
Thank you in advance. Alessandro.
Hi Alessandro,
The easiest way to check is by searching for "ASM1166" in the AHCI kernel driver. You can do this on the GitHub repository for the Linux kernel: https://github.com/torvalds/linux/blob/master/drivers/ata/ahci.c. I found that the driver does indeed support ASM1166.
I couldn't locate the exact patch that introduced this change in the kernel source. However, there's a good chance that it is supported in the latest releases, as people have been discussing it on the internet.
Regarding recommendations and stability, I came across a related thread that might interest you. They mention firmware updates as well: https://forum.openmediavault.org/index.php?thread/46589-unexpected-disk-erro... .
I hope this helps!
p.s. if you need that, I can double-check our kernel sources tomorrow for you.
Pawel
-- Pawel Suchanecki Evangelist / AlmaLinux.org
The open-source EL: long-term stability trusted by top organizations.
On Thu, Jan 18, 2024 at 5:37 PM Alessandro Baggi alessandro.baggi@gmail.com wrote:
Hi, I need to buy a SATA3 PCI-E 3.0 2x controller with 4 or 6 port. It will be installed on my workstation. I need to use AlmaLinux or at least Fedora.
Actually I found this:
https://www.silverstonetek.com/it/product/info/expansion-cards/ECS06/
but I can't determine if it is supported by the kernel. The chipset is ASMedia ASM1166 (AHCI). I can't find good results on google search.
How I can check if the controller is supported?
If not what controller do you suggest?
Thank you in advance. Alessandro. _______________________________________________ AlmaLinux Users mailing list -- users@lists.almalinux.org To unsubscribe send an email to users-leave@lists.almalinux.org
Hi, Today I installed the ECS06 Silverstone sata controller and it seems to work.
Thank you for your advice.
Best regards.
Alessandro.
Il 22/01/24 02:55, Pawel Suchanecki ha scritto:
Hi Alessandro,
The easiest way to check is by searching for "ASM1166" in the AHCI kernel driver. You can do this on the GitHub repository for the Linux kernel: https://github.com/torvalds/linux/blob/master/drivers/ata/ahci.c https://github.com/torvalds/linux/blob/master/drivers/ata/ahci.c. I found that the driver does indeed support ASM1166.
I couldn't locate the exact patch that introduced this change in the kernel source. However, there's a good chance that it is supported in the latest releases, as people have been discussing it on the internet.
Regarding recommendations and stability, I came across a related thread that might interest you. They mention firmware updates as well: https://forum.openmediavault.org/index.php?thread/46589-unexpected-disk-erro... https://forum.openmediavault.org/index.php?thread/46589-unexpected-disk-errors-seen-with-pcie-card-when-adding-more-than-2-disks/.
I hope this helps!
p.s. if you need that, I can double-check our kernel sources tomorrow for you.
Pawel
-- Pawel Suchanecki Evangelist / AlmaLinux.org
The open-source EL: long-term stability trusted by top organizations.
On Thu, Jan 18, 2024 at 5:37 PM Alessandro Baggi <alessandro.baggi@gmail.com mailto:alessandro.baggi@gmail.com> wrote:
Hi, I need to buy a SATA3 PCI-E 3.0 2x controller with 4 or 6 port. It will be installed on my workstation. I need to use AlmaLinux or at least Fedora. Actually I found this: https://www.silverstonetek.com/it/product/info/expansion-cards/ECS06/ <https://www.silverstonetek.com/it/product/info/expansion-cards/ECS06/> but I can't determine if it is supported by the kernel. The chipset is ASMedia ASM1166 (AHCI). I can't find good results on google search. How I can check if the controller is supported? If not what controller do you suggest? Thank you in advance. Alessandro. _______________________________________________ AlmaLinux Users mailing list -- users@lists.almalinux.org <mailto:users@lists.almalinux.org> To unsubscribe send an email to users-leave@lists.almalinux.org <mailto:users-leave@lists.almalinux.org>
Hi, This is my feedback about the Silverstone ECS06 SATA controller. I'm receiving many problem using the controller. After some days it generated many problems:
1) Slowdown system boot and the system latency is bad. 2) There is a bug in the driver about device enumeration. The controller has 6 sata port but it enumerates until 36. 3) This is a minor problem and fixable. I attached the controller on PCI-E 2x and all devices like network adapters are renamed so all network configuration was broken and it should be re-done. 4) It created some conflicts with my NVIDIA GPU at the point that I unplugged the GPU because during every boot it freezed during driver loading. 5) UEFI problem. I receive on boot a bad message from BIOS/UEFI like this:
"GPT header corruption has been detected, please check SATA mode setting in BIOS Setup, or you can use [Boot Sector (MBR/GPT) Recovery Policy] item under [Boot Configuration] page to recovery GPT Headers"
I checked settings in the BIOS and SATA MODE was correct (AHCI). No other option configurable for this devices. The only workaround is change the recovery policy to Auto. With this config the problem disappear but all others not.
I don't know if this is a faulty controller, a driver problem or whatever. I tried several configuration and several PCI-E slot but nothing helped this controller to work as expected. Removed the controller and all problem vanished.
In my case I don't recommended it.
My 2 cents.
Best regards.
Il 22/01/24 15:09, Alessandro Baggi ha scritto:
Hi, Today I installed the ECS06 Silverstone sata controller and it seems to work.
Thank you for your advice.
Best regards.
Alessandro.
Il 22/01/24 02:55, Pawel Suchanecki ha scritto:
Hi Alessandro,
The easiest way to check is by searching for "ASM1166" in the AHCI kernel driver. You can do this on the GitHub repository for the Linux kernel: https://github.com/torvalds/linux/blob/master/drivers/ata/ahci.c https://github.com/torvalds/linux/blob/master/drivers/ata/ahci.c. I found that the driver does indeed support ASM1166.
I couldn't locate the exact patch that introduced this change in the kernel source. However, there's a good chance that it is supported in the latest releases, as people have been discussing it on the internet.
Regarding recommendations and stability, I came across a related thread that might interest you. They mention firmware updates as well: https://forum.openmediavault.org/index.php?thread/46589-unexpected-disk-erro... https://forum.openmediavault.org/index.php?thread/46589-unexpected-disk-errors-seen-with-pcie-card-when-adding-more-than-2-disks/.
I hope this helps!
p.s. if you need that, I can double-check our kernel sources tomorrow for you.
Pawel
-- Pawel Suchanecki Evangelist / AlmaLinux.org
The open-source EL: long-term stability trusted by top organizations.
On Thu, Jan 18, 2024 at 5:37 PM Alessandro Baggi <alessandro.baggi@gmail.com mailto:alessandro.baggi@gmail.com> wrote:
Hi, I need to buy a SATA3 PCI-E 3.0 2x controller with 4 or 6 port. It will be installed on my workstation. I need to use AlmaLinux or at least Fedora.
Actually I found this:
https://www.silverstonetek.com/it/product/info/expansion-cards/ECS06/ https://www.silverstonetek.com/it/product/info/expansion-cards/ECS06/
but I can't determine if it is supported by the kernel. The chipset is ASMedia ASM1166 (AHCI). I can't find good results on google search.
How I can check if the controller is supported?
If not what controller do you suggest?
Thank you in advance. Alessandro. _______________________________________________ AlmaLinux Users mailing list -- users@lists.almalinux.org mailto:users@lists.almalinux.org To unsubscribe send an email to users-leave@lists.almalinux.org mailto:users-leave@lists.almalinux.org
My best advice would be an older LSI/Broadcom HBA which can be found pretty cheap on eBay these days.
The 9300-8i chip would be a solid starting point.
On Wed, Jan 31, 2024 at 11:05 AM Alessandro Baggi < alessandro.baggi@gmail.com> wrote:
Hi, This is my feedback about the Silverstone ECS06 SATA controller. I'm receiving many problem using the controller. After some days it generated many problems:
- Slowdown system boot and the system latency is bad.
- There is a bug in the driver about device enumeration. The controller
has 6 sata port but it enumerates until 36. 3) This is a minor problem and fixable. I attached the controller on PCI-E 2x and all devices like network adapters are renamed so all network configuration was broken and it should be re-done. 4) It created some conflicts with my NVIDIA GPU at the point that I unplugged the GPU because during every boot it freezed during driver loading. 5) UEFI problem. I receive on boot a bad message from BIOS/UEFI like this:
"GPT header corruption has been detected, please check SATA mode setting in BIOS Setup, or you can use [Boot Sector (MBR/GPT) Recovery Policy] item under [Boot Configuration] page to recovery GPT Headers"
I checked settings in the BIOS and SATA MODE was correct (AHCI). No other option configurable for this devices. The only workaround is change the recovery policy to Auto. With this config the problem disappear but all others not.
I don't know if this is a faulty controller, a driver problem or whatever. I tried several configuration and several PCI-E slot but nothing helped this controller to work as expected. Removed the controller and all problem vanished.
In my case I don't recommended it.
My 2 cents.
Best regards.
Il 22/01/24 15:09, Alessandro Baggi ha scritto:
Hi, Today I installed the ECS06 Silverstone sata controller and it seems to work.
Thank you for your advice.
Best regards.
Alessandro.
Il 22/01/24 02:55, Pawel Suchanecki ha scritto:
Hi Alessandro,
The easiest way to check is by searching for "ASM1166" in the AHCI kernel driver. You can do this on the GitHub repository for the Linux kernel: https://github.com/torvalds/linux/blob/master/drivers/ata/ahci.c https://github.com/torvalds/linux/blob/master/drivers/ata/ahci.c. I found that the driver does indeed support ASM1166.
I couldn't locate the exact patch that introduced this change in the kernel source. However, there's a good chance that it is supported in the latest releases, as people have been discussing it on the internet.
Regarding recommendations and stability, I came across a related thread that might interest you. They mention firmware updates as well:
https://forum.openmediavault.org/index.php?thread/46589-unexpected-disk-erro... < https://forum.openmediavault.org/index.php?thread/46589-unexpected-disk-erro...
.
I hope this helps!
p.s. if you need that, I can double-check our kernel sources tomorrow for you.
Pawel
-- Pawel Suchanecki Evangelist / AlmaLinux.org
The open-source EL: long-term stability trusted by top organizations.
On Thu, Jan 18, 2024 at 5:37 PM Alessandro Baggi <alessandro.baggi@gmail.com mailto:alessandro.baggi@gmail.com> wrote:
Hi, I need to buy a SATA3 PCI-E 3.0 2x controller with 4 or 6 port. It will be installed on my workstation. I need to use AlmaLinux orat
least Fedora. Actually I found this:https://www.silverstonetek.com/it/product/info/expansion-cards/ECS06/ https://www.silverstonetek.com/it/product/info/expansion-cards/ECS06/
but I can't determine if it is supported by the kernel. Thechipset is ASMedia ASM1166 (AHCI). I can't find good results on google search.
How I can check if the controller is supported? If not what controller do you suggest? Thank you in advance. Alessandro. _______________________________________________ AlmaLinux Users mailing list -- users@lists.almalinux.org <mailto:users@lists.almalinux.org> To unsubscribe send an email to users-leave@lists.almalinux.org <mailto:users-leave@lists.almalinux.org>
AlmaLinux Users mailing list -- users@lists.almalinux.org To unsubscribe send an email to users-leave@lists.almalinux.org
Hi Jonathan, thank you for your suggestion.
Best regards. Alessandro.
Il 01/02/24 09:41, Jonathan Wright ha scritto:
My best advice would be an older LSI/Broadcom HBA which can be found pretty cheap on eBay these days.
The 9300-8i chip would be a solid starting point.
On Wed, Jan 31, 2024 at 11:05 AM Alessandro Baggi <alessandro.baggi@gmail.com mailto:alessandro.baggi@gmail.com> wrote:
Hi, This is my feedback about the Silverstone ECS06 SATA controller. I'm receiving many problem using the controller. After some days it generated many problems: 1) Slowdown system boot and the system latency is bad. 2) There is a bug in the driver about device enumeration. The controller has 6 sata port but it enumerates until 36. 3) This is a minor problem and fixable. I attached the controller on PCI-E 2x and all devices like network adapters are renamed so all network configuration was broken and it should be re-done. 4) It created some conflicts with my NVIDIA GPU at the point that I unplugged the GPU because during every boot it freezed during driver loading. 5) UEFI problem. I receive on boot a bad message from BIOS/UEFI like this: "GPT header corruption has been detected, please check SATA mode setting in BIOS Setup, or you can use [Boot Sector (MBR/GPT) Recovery Policy] item under [Boot Configuration] page to recovery GPT Headers" I checked settings in the BIOS and SATA MODE was correct (AHCI). No other option configurable for this devices. The only workaround is change the recovery policy to Auto. With this config the problem disappear but all others not. I don't know if this is a faulty controller, a driver problem or whatever. I tried several configuration and several PCI-E slot but nothing helped this controller to work as expected. Removed the controller and all problem vanished. In my case I don't recommended it. My 2 cents. Best regards. Il 22/01/24 15:09, Alessandro Baggi ha scritto: > Hi, > Today I installed the ECS06 Silverstone sata controller and it seems to > work. > > Thank you for your advice. > > Best regards. > > Alessandro. > > Il 22/01/24 02:55, Pawel Suchanecki ha scritto: >> Hi Alessandro, >> >> The easiest way to check is by searching for "ASM1166" in the AHCI >> kernel driver. You can do this on the GitHub repository for the Linux >> kernel: >> https://github.com/torvalds/linux/blob/master/drivers/ata/ahci.c <https://github.com/torvalds/linux/blob/master/drivers/ata/ahci.c> >> <https://github.com/torvalds/linux/blob/master/drivers/ata/ahci.c <https://github.com/torvalds/linux/blob/master/drivers/ata/ahci.c>>. I >> found that the driver does indeed support ASM1166. >> >> I couldn't locate the exact patch that introduced this change in the >> kernel source. However, there's a good chance that it is supported in >> the latest releases, as people have been discussing it on the internet. >> >> Regarding recommendations and stability, I came across a related >> thread that might interest you. They mention firmware updates as well: >> https://forum.openmediavault.org/index.php?thread/46589-unexpected-disk-errors-seen-with-pcie-card-when-adding-more-than-2-disks/ <https://forum.openmediavault.org/index.php?thread/46589-unexpected-disk-errors-seen-with-pcie-card-when-adding-more-than-2-disks/> <https://forum.openmediavault.org/index.php?thread/46589-unexpected-disk-errors-seen-with-pcie-card-when-adding-more-than-2-disks/ <https://forum.openmediavault.org/index.php?thread/46589-unexpected-disk-errors-seen-with-pcie-card-when-adding-more-than-2-disks/>>. >> >> I hope this helps! >> >> p.s. if you need that, I can double-check our kernel sources tomorrow >> for you. >> >> Pawel >> >> >> -- >> Pawel Suchanecki >> Evangelist / AlmaLinux.org >> >> The open-source EL: long-term stability trusted by top organizations. >> >> >> On Thu, Jan 18, 2024 at 5:37 PM Alessandro Baggi >> <alessandro.baggi@gmail.com <mailto:alessandro.baggi@gmail.com> <mailto:alessandro.baggi@gmail.com <mailto:alessandro.baggi@gmail.com>>> wrote: >> >> Hi, >> I need to buy a SATA3 PCI-E 3.0 2x controller with 4 or 6 port. >> It will be installed on my workstation. I need to use AlmaLinux or at >> least Fedora. >> >> Actually I found this: >> >> >> https://www.silverstonetek.com/it/product/info/expansion-cards/ECS06/ <https://www.silverstonetek.com/it/product/info/expansion-cards/ECS06/> >> <https://www.silverstonetek.com/it/product/info/expansion-cards/ECS06/ <https://www.silverstonetek.com/it/product/info/expansion-cards/ECS06/>> >> >> but I can't determine if it is supported by the kernel. The >> chipset is >> ASMedia ASM1166 (AHCI). I can't find good results on google search. >> >> How I can check if the controller is supported? >> >> If not what controller do you suggest? >> >> Thank you in advance. >> Alessandro. >> _______________________________________________ >> AlmaLinux Users mailing list -- users@lists.almalinux.org <mailto:users@lists.almalinux.org> >> <mailto:users@lists.almalinux.org <mailto:users@lists.almalinux.org>> >> To unsubscribe send an email to users-leave@lists.almalinux.org <mailto:users-leave@lists.almalinux.org> >> <mailto:users-leave@lists.almalinux.org <mailto:users-leave@lists.almalinux.org>> >> _______________________________________________ AlmaLinux Users mailing list -- users@lists.almalinux.org <mailto:users@lists.almalinux.org> To unsubscribe send an email to users-leave@lists.almalinux.org <mailto:users-leave@lists.almalinux.org>-- Jonathan Wright AlmaLinux Foundation Mattermost: chat https://chat.almalinux.org/almalinux/messages/@jonathan
participants (3)
-
Alessandro Baggi -
Jonathan Wright -
Pawel Suchanecki