- AlmaLinux Users - AlmaLinux List Archives

Rally Racer EVO
by nicklesteele532＠gmail.com 25 Jul '23

25 Jul '23

Use your computer to play Rally Racer EVO. Getting your driver's license is a must before joining any group or even driving a car or other vehicle. Similarly, in Rally Racer EVO, you will need to do the same. Getting your driver's license is Step One on the Road to the Ultimate Rally Racing Experience. If you want to get into the exciting world of rally racing, you'll need to enroll in one of 32 different licensing classes. If you want to be a genuine driver, you need to finish them as quickly as possible. Once you've obtained your driver's license, you may enter Events Mode and compete in over eighty-five different races. Compete in six different races to prove your mettle as a rally racer. Rally racing prowess may also be shown in the game's Arena Mode. You'll want to practice your drifting talents in this mode. There are four different game modes to try out, and no matter which one you choose, you'll have a great time showing off your driving talents. Supercars That Feel Like the Real Thing Rally Racer EVO has not just many game modes, but also a garage full of actual supercars from which to choose. Additionally, these automobiles may be made even more potent by upgrading and experimenting with the available modification choices. Your supercar may be customized to reflect your own taste. This racing game is already fantastic, but it's much better since it has 12 beautiful circuits that can be customized for different weather and lighting circumstances. Realistic physics and handling, like you'd experience in a physical automobile, are also readily apparent. The visuals and audio in this game have been finely tuned to enhance the realism of the experience. Connect: https://backroomsgame.io

1 0

Tips and tricks to master in 1v1 lol
by noteminnow＠gmail.com 28 Jun '23

28 Jun '23

Tip 1 It's simply how to fire without using your crosshairs. Just shooting near your opponent will ensure that your bullets strike them. It doesn't even have to be turned on, and your crosshair may be close to them. You don't have to aim at them for it to strike them perfectly. This will come in handy if you shock them once and then use your AR. Larger bullets spread so that even if you miss a little bit, you still strike them, and it's a strong technique to achieve this, so take use of it. Tip 2 So, essentially, you have to create a floor then spam leap if you're building up and your opponent puts a ramp above you. Tip 3 To begin, ensure that school is turned on, then construct a wall, go to the opposite side of the wall, and scroll. We'll simply scroll the wheel and you'll walk right through the wall, so when you approach it, just scroll the wheel up or down and you'll walk right through it. This is similar to breaking past barriers in a competitive game. Tip 4 There are several methods to personalize your name, and most of them are simple. To begin, how do you alter the color of your name? You will put "color= + "name of color you want" + >" + "your name" (Example: color=red> Pete). Second, change the size. Write "size= + "a number you want" + >" + your name" (Example: size=15> Pete). The next step is to make this form bold: "b> + your name". You can also make your name italics and underlined by typing I + your name" and "u> + your name" in the appropriate fields. Tip 5 It's extremely simple to float in 1v1 lol, but not everyone knows how. All you have to do is left-click and spam G! The material shown here has been gathered and compiled to provide you with a general knowledge of the game. https://1v1-lol.io

1 0

repo.almalinux.org ipv6 access
by Gerald Vogt 21 May '23

21 May '23

Hi! repo.almalinux.org shows two addresses for me % host repo.almalinux.org repo.almalinux.org has address 67.222.0.50 repo.almalinux.org has IPv6 address 2600:4c00:400::2 While the ipv4 address is working fine, ports 80 and 443 on 2600:4c00:400::2 are not accessible. Connection attempts time out. Regards, Gerald

2 1

Introducing AlmaLinux Accounts
by Jonathan Wright 05 May '23

05 May '23

Over the past few months, our infrastructure team <https://wiki.almalinux.org/sigs/Infrastructure.html> has been hard at work preparing our single sign-on system that will provide a unified login experience to nearly all AlmaLinux websites and properties. We are happy to announce the launch of https://accounts.almalinux.org! AlmaLinux Accounts <https://accounts.almalinux.org> will give you a single account to use across the array of sites and services offered by AlmaLinux! In addition it eases the process of onboarding new contributors through centralized groups and permissions. Why? Introducing our Single Sign-On (SSO) system offers numerous benefits for both users and the AlmaLinux OS Foundation. SSO enhances security, streamlines access, and simplifies user management across our ecosystem. With a single set of credentials, users can seamlessly navigate all AlmaLinux websites and services. This unified login experience ultimately boosts productivity, fosters collaboration, and provides a more cohesive and personalized experience for our community. Software Stack In the spirit of FOSS, it was only natural for us to stick with a free and open-source software stack. The chosen components should be familiar to anyone who has dealt with directory management or SSO in the Enterprise Linux space. We took inspiration from Fedora’s account system for some components. We have chosen the following FOSS components to power our SSO: - FreeIPA <https://www.freeipa.org> for directory and user management. - Noggin <https://github.com/fedora-infra/noggin>, a web front-end for user self-service. We’ve been doing work in the Fedora project to get noggin and its dependencies added to EPEL 9. This will benefit anyone looking to deploy noggin on RHEL 9 or RHEL 9 compatible distros. 1 - Keycloak <https://www.keycloak.org/>, an OpenID Connect system to sit between applications and LDAP. We’ve started contributing to a playbook mostly maintained by RHEL engineers to help ease the deployment of Keycloak on EL distros. 2 What About My Existing Account(s)? We have a transition plan for the next few weeks to get all systems fully supporting our AlmaLinux Accounts <https://accounts.almalinux.org> and all existing accounts transitioned into the system, or otherwise integrated. chat.almalinux.org (Mattermost) chat.almalinux.org is the single largest standalone user database we have to transition. Luckily this is a very easy and painless task for us as well as users. After you’ve created your AlmaLinux Account <https://accounts.almalinux.org>, navigate to the Profile -> Security section in Mattermost. [image: Step 1 of converting MatterMost account to use AlmaLinux Accounts] From here click on Edit next to Sign-in Method and then Switch to Using OpenID SSO and you can link your new AlmaLinux account. *Keep in mind that once you link your account you will always use your AlmaLinux account to sign in to chat.almalinux.org <http://chat.almalinux.org>.* [image: Step 2 of associating chat.almalinux.org account with AlmaLinux Accounts] On the next screen enter your current chat.almalinux.org (Mattermost) password. [image: Step 3 of associating chat.almalinux.org account with AlmaLinux Accounts]) Finally, log in using your AlmaLinux Account details. [image: Step 4 of associating chat.almalinux.org account with AlmaLinux Accounts] From now on when you log in to chat.almalinux.org you will use your AlmaLinux Account via the dedicated login button: [image: How to log in to chat.almalinux.org/Mattermost with AlmaLinux Accounts] bugs.almalinux.org All existing users on bugs.almalinux.org have been imported as AlmaLinux Accounts. You can gain access to the account by requesting a password reset at https://accounts.almalinux.org/forgot-password/ask using your username. git.almalinux.org git.almalinux.org was originally setup with only GitHub as an authentication source. This is now disabled and you must use your AlmaLinux Account to log in. If you wish to recover your previous git.almalinux.org account send an email to account-merge(a)almalinux.org from the address tied to your GitHub and AlmaLinux accounts and we can tie them together for you. lists.almalinux.org lists.almalinux.org has been tied into AlmaLinux Accounts <https://accounts.almalinux.org> for a few weeks now. Existing lists accounts can be linked to AlmaLinux Accounts seamlessly. Login option for new accounts: [image: Step 1 of associating lists.almalinux.org account with AlmaLinux Accounts] Tie your existing account to your AlmaLinux Account at https://lists.almalinux.org/accounts/social/connections/: [image: Step 2 of associating lists.almalinux.org account with AlmaLinux Accounts] pes.almalinux.org The Package Evolution Service (PES) will be updated with OIDC support, and subsequently AlmaLinux Account support soon. build.almalinux.org The AlmaLinux Build System (ALBS) will be updated with OIDC support, and subsequently AlmaLinux Account support soon. Other There are various other services used by contributors which are mostly tied into AlmaLinux Accounts already with a few to follow soon. Frequently Asked Questions *Q:* I configured 2FA/OTP at https://accounts.almalinux.org but *service/site XYZ* does not have a field for my OTP on the login page. *A:* All sites tied to AlmaLinux Accounts <https://accounts.almalinux.org> support your 2FA/OTP. Simply add it to the end of your password in the password field when logging in. For example if your password is hunter2 and your OTP is 123456 you would enter hunter2123456 into the password field. *Q:* Where should I go for help? *A:* The Infrastructure Channel on Mattermost <https://chat.almalinux.org/almalinux/channels/infrastructure>, IRC <https://web.libera.chat/#almalinux-infrastructure>, mailing list <https://lists.almalinux.org/mailman3/lists/infra.lists.almalinux.org/>. *Q:* Where can I use my AlmaLinux Account <https://accounts.almalinux.org>? *A: *See the table in the blog post <https://almalinux.org/blog/almalinux-accounts-launch/#frequently-asked-ques…> . ------------------------------ 1 *https://bodhi.fedoraproject.org/updates/FEDORA-EPEL-2023-b0e8a9d618 <https://bodhi.fedoraproject.org/updates/FEDORA-EPEL-2023-b0e8a9d618>* *https://bodhi.fedoraproject.org/updates/FEDORA-EPEL-2023-cfcb055a9f <https://bodhi.fedoraproject.org/updates/FEDORA-EPEL-2023-cfcb055a9f>* *https://bodhi.fedoraproject.org/updates/FEDORA-EPEL-2023-fdfb8a6342 <https://bodhi.fedoraproject.org/updates/FEDORA-EPEL-2023-fdfb8a6342>* *https://bodhi.fedoraproject.org/updates/FEDORA-EPEL-2023-3b54948adb <https://bodhi.fedoraproject.org/updates/FEDORA-EPEL-2023-3b54948adb>* *https://bodhi.fedoraproject.org/updates/FEDORA-EPEL-2023-46e518d693 <https://bodhi.fedoraproject.org/updates/FEDORA-EPEL-2023-46e518d693>* *https://bodhi.fedoraproject.org/updates/FEDORA-EPEL-2023-607e3d35c7 <https://bodhi.fedoraproject.org/updates/FEDORA-EPEL-2023-607e3d35c7>* *https://bodhi.fedoraproject.org/updates/FEDORA-EPEL-2023-6215554ad9 <https://bodhi.fedoraproject.org/updates/FEDORA-EPEL-2023-6215554ad9>* *https://bugzilla.redhat.com/show_bug.cgi?id=2174923 <https://bugzilla.redhat.com/show_bug.cgi?id=2174923>* 2 *https://github.com/ansible-middleware/keycloak/pull/73 <https://github.com/ansible-middleware/keycloak/pull/73>* --- Jonathan Wright AlmaLinux Foundation Mattermost: chat <https://chat.almalinux.org/almalinux/messages/@jonathan>

1 0

Email to root not sending
by Neil Aggarwal 18 Apr '23

18 Apr '23

Hey everyone: I did a fresh install of AlmaLinux 9.1 on a server. I then set the root email address to my admin email address in /etc/aliases and ran newaliases. But, when I send email to root, it does not come to me. I see sendmail is installed on the machine already and I tested outgoing connections to port 25. Any ideas? Thank you, Neil -- Neil Aggarwal, (972) 834-1565, http://www.propfinancing.com We offer 30 year loans on single family houses!

2 3

AlmaLinux 9.1 and rsync problem
by Alessandro Baggi 13 Apr '23

13 Apr '23

Hey there, I'm using AlmaLinux 9.1 as my backup server using a script. I noticed that if I run: rsync --cc=xxh128.... it reports: unknown checksum name: xxh128 while inside the rsync manual page this checksum is documented. Running rsync --version I get: Checksum list: md5 md4 none Seems that other checksum type where disabled on compilation but reported on documentation. The absence of xxh128/xxh64 is a bug or them are disabled by default on compilation? Thank you in advance.

2 3

What is syncthing in alma linux
by Patrick Begou 15 Mar '23

15 Mar '23

I all, on a freshly installed Alma Linux 8.7 I can see a syncthing process communicating over https to a remote unknown server. Syncthing is installed automaticaly but what does this process with the remote server ? (base) bash-4.4$ netstat -puta |grep syncthing tcp 0 0 0.0.0.0:35533 0.0.0.0:* LISTEN 4902/syncthing tcp 0 0 localhost:38257 0.0.0.0:* LISTEN 4902/syncthing tcp 0 0 xxxxxxxx.legi:kitim 195.219.124.44:https ESTABLISHED 4902/syncthing udp 0 0 0.0.0.0:32779 0.0.0.0:* 4902/syncthing udp 0 0 0.0.0.0:35533 0.0.0.0:* 4902/syncthing udp 0 0 0.0.0.0:21027 0.0.0.0:* 4902/syncthing I read it that “Syncthing replaces proprietary sync and cloud services with something open, trustworthy and decentralized. Your data is your data alone and you deserve to choose where it is stored, if it is shared with some third party and how it's transmitted over the Internet." But I do not want to share my datas! Any details welcome. Patrick

2 2

hplip toolbox error
by John Thompson 10 Mar '23

10 Mar '23

Trying to use hp-tool box to configure my printers fails thus: HP Linux Imaging and Printing System (ver. 3.21.2) HP Device Manager ver. 15.0 Copyright (c) 2001-18 HP Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Traceback (most recent call last): File "/usr/bin/hp-toolbox", line 270, in <module> ui = import_module(ui_package + ".devmgr5") File "/usr/lib64/python3.9/importlib/__init__.py", line 127, in import_module return _bootstrap._gcd_import(name[level:], package, level) File "<frozen importlib._bootstrap>", line 1030, in _gcd_import File "<frozen importlib._bootstrap>", line 1007, in _find_and_load File "<frozen importlib._bootstrap>", line 972, in _find_and_load_unlocked File "<frozen importlib._bootstrap>", line 228, in _call_with_frames_removed File "<frozen importlib._bootstrap>", line 1030, in _gcd_import File "<frozen importlib._bootstrap>", line 1007, in _find_and_load File "<frozen importlib._bootstrap>", line 984, in _find_and_load_unlocked ModuleNotFoundError: No module named 'ui5' These are the rpms I installed: [john@alma ~]$ rpm -qa|grep hplip hplip-common-3.21.2-6.el9.alma.x86_64 hplip-libs-3.21.2-6.el9.alma.x86_64 hplip-3.21.2-6.el9.alma.x86_64 From the official almalinux repo: [john@alma ~]$ rpm -qi hplip Name : hplip Version : 3.21.2 Release : 6.el9.alma Architecture: x86_64 Install Date: Thu 09 Mar 2023 01:31:57 PM CST Group : Unspecified Size : 27157762 License : GPLv2+ and MIT and BSD and IJG and Public Domain and GPLv2+ with exceptions and ISC Signature : RSA/SHA256, Tue 12 Apr 2022 01:22:53 PM CDT, Key ID d36cb86cb86b3716 Source RPM : hplip-3.21.2-6.el9.alma.src.rpm Build Date : Tue 12 Apr 2022 11:49:56 AM CDT Build Host : x64-builder01.almalinux.org Packager : AlmaLinux Packaging Team <packager(a)almalinux.org> Vendor : AlmaLinux URL : https://developers.hp.com/hp-linux-imaging-and-printing Summary : HP Linux Imaging and Printing Project Description : The Hewlett-Packard Linux Imaging and Printing Project provides drivers for HP printers and multi-function peripherals. Any ideas? -- -John Thompson (johndthompson(a)gmail.com) Appleton WI USA

2 1

Alma 9 keep server up and running.
by jdwirtz＠cox.net 09 Mar '23

09 Mar '23

How do I keep my server from "sleeping". It shuts down, but power light is still on and nothing will bring it back except power cycling. I've tried everything I can find on disabling sleep and hibernation but it still keeps "sleeping". What good is a web server that doesn't stay up and running?

4 10

AlmaLinux on WSL initscripts
by Travis Newton 25 Feb '23

25 Feb '23

Hello, I’m having an issue with Windows 10, WSL, and AlmaLinux 8. WSL is at version 1.0.3.0 so what I am trying to do should work. But since it’s easy to blame Microsoft, I am going to do that for the time being. 😊 I am trying to use systemd within WSL running AlmaLinux. AlmaLinux is fully updated on 8.7. I edited /etc/wsl.conf to include [boot] and setting systemd as true. I’ve restarted WSL (and the Windows computer), and still for the life of me, I cannot get AlmaLinux to load systemd. The fallback should be using initscripts. Obviously, RHEL (so AlmaLinux), have moved to systemd but there is an initscripts package. I installed that and even restarted WSL for good measure, but unfortunately it redirects service to systemctl and then it complains that the system was booted as init and not systemd and it can’t operate. So my question is, has anyone either got systemd working on AlmaLinux under WSL or has anyone got initscripts working? I’ve been Googling this like mad but all I’ve been able to find are articles regarding Ubuntu. Thanks in advance if anyone can provide some insight! Kind regards, Travis Newton Founder/Owner Hosting Intellect, LLC (Formerly Xinsto, LLC) [Hosting Intellect, LLC Logo] https://www.hostingintellect.com<https://www.hostingintellect.com/> -- This e-mail and any attached files are confidential and may be legally privileged. If you are not the addressee, any disclosure, reproduction, copying, distribution, or other dissemination or use of this communication is strictly prohibited. If you have received this transmission in error please notify the sender immediately and then delete this mail. E-mail transmission cannot be guaranteed to be secure or error free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message which arise as a result of e-mail transmission or changes to transmitted date not specifically approved by the sender. If this e-mail or attached files contain information which do not relate to our professional activity we do not accept liability for such information.

2 2